Cyclo Vac Central vacuum system Owner's Manual page 26

H & HX Series - Hybrid Filtration
CONVERTING THE UNIT
Your Cyclo Vac central vacuum unit was
designed for use with or without disposable
bag. Though it is sold with a bag installed, it
can easily be removed, and the unit modified
for use without disposable bags.
1. To access the bag, unlatch the two clips
and remove the dust receptacle (figure 22).
2. Remove the used bag (figure 23). If it
has been used, seal its opening with the
self-adhesive flap on the bag collar (see
instructions on the bag). Discard the used
bag. If the bag was not utilized, you may
wish to store it for later use.
3. Remove the two screws from the adaptor.
(figure 24).
4. While grasping both the bag adaptor and
the fitting, turn and remove the bag adaptor
(figure 25). Store these parts for future
use, if desired.
5. The vacuum unit is now ready for use
without bags.
Note: this procedure is reversible at any time.
For instructions on installing the dust bag,
please refer to page 23.
26 Maintenance
figure 22
figure 23
figure 24
figure 25