Table of Contents
Advertisement
Using the Boot ROM Test Mode for HP-UX Systems
Perform the followingsteps to select and run self Tests on HP-UX systems.
1.
2
3.
4.
When our display'slast lines show the followingmessage,you ean start the
d
Ttit
ode
RESET to
Power-UP,
SPACE to
clear
input
Wait
ing
for
system
Selection
?
Tjpe the command:
T <Return>
The followingself Test Controls Menu appears.
Self
Test
Controls
Keys
Test
Option
Seleoted
-----------------------------
1
Cent inuous
N
2
Extended
N
3
Test
Uenory
Y
D
set
Defaults
R
Run Tests
-----------------------------
Type
[key ] RETURN?
T~
the command key to set the status for the test you want to run
kqy <Return>
Continuous testing causes the bmt ROM to repeat the self-test.
Extended testin
invokes a longer memory test and enables the LAN and
d
SCSI tests. S
tests are
for
external SCSI devicxxonly. If an external
MAU is not connected for AUI interfa=, the test reports a failure.
Tat Memory may be disabled by setting it to N.
To run the self-tests, type the followingcommand
?.-< ?.etwa >
The
self-tests
running in Extended or Tat Memory mode automatically
stop when the finish and the system unit then goes into tmot mode.
/
i
Continuous Se f-Tests arerunning, they maybe stopped by resetting the sys-
tem unit or eyciingpower.
Diagnostics
5-13
Advertisement
Table of Contents
