Table of Contents
Advertisement
Changing1/0 Configuration
Perform
1.
2
3.
4.
5.
6.
7.
8.
9.
the followingsteps to change an interfatx configuration
If you have already booted an operating system, log out and stop any
user processes. If not, go on to step 2.
Reset the system unit. When the power-up display, identifies the key-
board, type the followingcommand
C <Return>
From the Configuration Control Menu, type the followtngcommand
display the I/O Configuration Menu:
1 <Return>
From the I/O Configuration Menu, type the number for the interface
that you want to eontigure
key <Return>
T~
the number for the feature that you want to change
key <Return >
T~
the number or letter key(s) to change the feature
keyfs) <Return>
Exit the selected interfaee menu by typing the followingcommand
X <Return>
Type the appropriate letter key to store the new values, store the de-
fault values, or abort and not make any chang=
key <Return >
When you turn on the system unit for the first time and the Configur
tion Control Menu appears, type the followingcmmmandto enter the
Auto System Select Mode
2 <Return>
10. If you have already selected an operating system, abort the menu with
out making changes by typing the followingcommand
A <Return>
Advertisement
Table of Contents
