System - HP Apollo 9000 400dl Service Handbook

~onflguring the EEPROM on HP-UX Compatible
Mode Systems
This
s eetion explains how to confi re the EEPROM for the boot mode, auto
P system select, and integrated inter aces for HP-UX systems.
Boot Mode Selection
Perform the followingsteps to select the boot mcde for an HP-UX system:
1.
2
3.
4.
5.
6.
7.
8.
3-2a
If you have already booted an operating system, log out and stop any
user processes If not, go on to step 2
If the system unit is operating in HP-UX mode, reset the system unit
and get the power-up display.Then, when the keyhoard is identified,
type the followingcommand:
C <Return>
If the system unit is operating in Domain mode, reset the system unit
and type the followingeomand
CF <Return>
From the Configuration Control Menu, type the number key command
to get the Boot Mode Selection Menu:
&q <Return>
From the Boot Mode Selection Menu, type the number key for the
Boot Mode you want to use.
key <Return >
From the Boot McxieSelection sub-menu, type the command to make
the selection temporaV (T) or permanent (P]
key < Return>
To execute the menu, type the followingcommand
E <Return>
The system unit
resets
and goes into the boot mode you have selected.
Configuration