Boot Rom Messages - HP Apollo 9000 400dl Service Handbook

Boot ROM Messages
Table5-6 and Table5-7
list
themess~es displayed for Boot ROM funct
Each message is explained and, if requtred, a procedure to resolve an ind
problem.
T&!e
5-4.
BootROM Di.rpIayedStatus Mersago
DisplayedMessage
Meaningand Whatto Do
CONFIGURE MODE System unit is
in configure mode.
Press B, ~ I or X and RETURN.
Bit Napped Display
Bit-mapped video board identified,
BOOTINC A SYSTEM An operating system is booting
(n) Bytes
Memory amount in decimal. Messag
appears after memory test completes.
Console
Keyboard at SC
Remote
keyboard circuit found at sele
code indicated.
DMA
DMA circuit identified.
HP-HIL. Keyboard
CPU
board HP-HIL circuit identified
Keyboard may now be used.
HP-IB HP-lB interfati circuit identified.
HPnnnnn (type) at (SC) HP interface circuit identified:
nnnn =
product number
= interface type
&P= select cde
Found either the DIO-11 accessoryca
or an equivalent circuit on the CPU b
HP9S265 (SCSI [E] SC)
HP SCS1 interface circuit identified:
[E] = S
for single+mded
D
for deferential
SC = select code
Found either the DIC) accessory card
equivalent circuit on the CPU board.
LOADING MEMORY
Memory is loading with Boot ROM c
(Conti