Workstation And System Unit Configurations; Fru Configurations; Cpu Board Configurations - HP Apollo 9000 400dl Service Handbook

Cotilguration
3
This chapter rovidea configuration information for Series 400 workstations and
workstation I&Us.
Workstation and System Unit Configurations
Refer to the
HPAPoI1o 9000 Series 400 Suppoti Mattir
for a @replete list of sup-
ported aceeasories,peripherals, and operating systems.
FRU Configurations
The followingsubsections define the jum r and switch confi~rations for sys-
tem boards and internal storage devices. R efer to the appropriate figure for mn-
figuration information for the FRU that you're replacing.
NOTICE: Series 400 system units do not use SCSI bus termi-
nators on internal storage drives. No third-party
internal storage deviees can use terminator bexxuse
other storage drives may not function properly. Re-
fer to the third-party mass storage device'sdwu-
mentation for instructions.
CPU Board Configurations
Figure 3-1 shows the jumper locations for Series 400 CPU boards without inte-
~ted graphia. Figure 3-2 show the "um~r locations for the CPU board with
i
integrated graphica. Refer to Table 3- to find the clock speeds of these CPU
boards for the various Series 400 systems.