Park And Pickup; Default Display - Aastra 6735i User Manual

If you do not wish to add the second party to the conference:
Press the Cancel softkey while the
1.
second party's phone is ringing.
Drop the second party after consultation without establishing a conference:
After consulting with the second party:
1.
Press Drop.
Drop a party from an active conference:
Use
1.
Press Drop.
2.
Leave the conference:
Press the Leave softkey.
1.
Conference two separate calls already on hold:
Press Conf.
1.
Press the Line key of the first held call.
2.
Press Conf again.
3.
Press the Line key of the second held call
4.

Park and Pickup

6.5
The Call Park feature allows you to park a call so that any member of the group can retrieve it.
A call can be parked against any number in the group, including your own number.
You can only have one call parked at a time.
A 45-second timer is started when you park a call. If the timer expires and your line is idle, the
system rings your line. If you line is not idle, the timer is restarted for 10 seconds and the call
remains parked. This procedure is repeated until your line is idle, or the parked call is retrieved or
released.

Default Display

6.5.1
 The Park softkey is visible only when a call is connected.
___________________________________________________________________________________________
6735i IP PHONE USER GUIDE - CLEARSPAN
AASTRA – 2862-001
or to point to the party to drop.
You are reconnected to the first party.
L1 John Smith
1. [♫ Mary Jones
2. 1005
Drop
Conf
More
You are connected to the other party.
The other parties remain connected.
L1 John Smith
1. Mary Jones
2. 1005
Leave
Drop
More
Both calls are on hold.
The first line is connected.
The conference is established.
PAGE 62 OF 104