The end of the steering cable must be fully retracted into the outboard tilt
tube before adding lubricant. Adding lubricant to steering cable when fully
extended could cause steering cable to become hydraulically locked. A
hydraulically locked steering cable will cause loss of steering control,
possibly resulting in serious injury or death.
Tube Ref No.
2-4-C Marine Lubricant
95
with Teflon
4 Stroke 10W30
110
Outboard Oil
Checking Trim System Fluid Level
Avoid possible injury. Oil in the trim system is under pressure when the
outboard is in any position other than the full tilt position. Position the
outboard in the full tilt position before opening the fill cap.
MAINTENANCE
WARNING
!
Description
CAUTION
!
Where Used
Steering cable and
grease fitting on belt
tensioner pulley
Steering cable
74
7727
Part No.
92-802859A1
92-802833A1