Battery Inspection - Mercury 225 Pro XS User Manual

3. Set the spark plug gap to specifications.
Spark Plug Gap
4. Before installing spark plugs, clean off any dirt on the spark plug seats.
Install plugs finger tight, and then tighten 1/4 turn or torque to
specifications.
Description
Spark plug

Battery Inspection

The battery should be inspected at periodic intervals to ensure proper
engine starting capability.
IMPORTANT: Read the safety and maintenance instructions which
accompany your battery.
1. Turn off the engine before servicing the battery.
2. Add water as necessary to keep the battery full.
3. Make sure the battery is secure against movement.
4. Battery cable terminals should be clean, tight, and correctly installed.
Positive to positive and negative to negative.
5. Make sure the battery is equipped with a nonconductive shield to
prevent accidental shorting of battery terminals.
MAINTENANCE
ob00680
68
0.81 mm (0.032 in.)
Nm lb. in.
27
lb. ft.
20