Transporting; Trailering Boat/Outboard - Mercury 225 Pro XS User Manual

Trailering Boat/Outboard

Ensure that the outboard is in forward gear before trailering. This prevents
the propeller from spinning freely during transportation.
Avoid equipment damage. Always shift the gearcase into gear when the
engine is running and is operating at idle. Shifting into gear at engine
speeds above idle will damage the gearcase. Shifting into gear when the
engine is not running may cause clutch misalignment, preventing the
gearcase from shifting into gear.
Trailer your boat with the outboard tilted down in a vertical operating
position. If additional ground clearance is required, the outboard should be
tilted up using an accessory outboard support device. Refer to your local
dealer for recommendations. Additional clearance may be required for
railroad crossings, driveways and trailer bouncing.
IMPORTANT: Do not rely on the power trim/tilt system or tilt support lever
to maintain proper ground clearance for trailering. The outboard tilt support
lever is not intended to support the outboard for trailering.

TRANSPORTING

CAUTION
!
32
or26