Mercury 225 Pro XS User Manual page 20

WARRANTY INFORMATION
Non‑warranty maintenance, replacement, or repair of emission control
devices and systems may be performed by any marine engine repair
establishment or individual. The use of non‑Mercury parts for non‑warranty
maintenance or repairs will not be grounds for disallowing other warranty
work. The use of add‑on (as defined at section 1900 (b)(1) and (b)(10) of
Title 13 of the California Code of Regulations) or modified parts not
exempted by the California Air Resources Board may be grounds for
disallowing a warranty claim, at the discretion of Mercury Marine. Failures
of warranted parts caused by the use of a non‑exempted add‑on or
modified part will not be covered.
COMPONENTS OF THE EMISSIONS CONTROL SYSTEM:
1. Fuel Metering System
a. Carburetor and internal parts (and/or pressure regulator or fuel
injection system)
b. Cold start enrichment system
c. Intake valves
2. Air Induction System
a. Intake manifold
b. Turbocharger or supercharger systems (where applicable)
3. Ignition System
a. Spark plugs
b. Magneto or electronic ignition system
c. Spark advance/retard system
d. Ignition coil and/or control module
e. Ignition wires
4. Lubrication System
a. Oil pump and internal parts
b. Oil injectors
c. Oil meter
5. Exhaust system
a. Exhaust manifold
b. Exhaust valves
6. Miscellaneous Items Used in Above Systems
a. Hoses, clamps, fittings, tubing, sealing gaskets or devices, and
mounting hardware.
b. Pulleys, belts and idlers.
12