Top Cowl Removal And Installation; Cleaning Care For Top Cowl - Mercury 225 Pro XS User Manual

Top Cowl Removal and Installation

REMOVAL
Release the front and side cowl latches. Lift the top cowl from the outboard.
INSTALLATION
Position the top cowl over the engine. Make sure the bottom rubber seal
fits properly and lock the front and side latches.

Cleaning Care for Top Cowl

IMPORTANT: Dry wiping (wiping the plastic surface when it is dry) will
result in minor surface scratches. Always wet the surface before cleaning.
Follow cleaning and waxing procedure.
CLEANING AND WAXING PROCEDURE
1. Before washing, rinse the top cowl with clean water to remove dirt and
dust that may scratch the surface.
2. Wash the top cowl with clean water and a mild non‑abrasive soap.
Use a soft clean cloth when washing.
3. Dry thoroughly with a soft clean cloth.
4. Wax the surface using a non‑abrasive automotive polish (polish
designed for clear coat finishes). Remove the applied wax by hand
using a clean soft cloth.
MAINTENANCE
60
or38