Table of Contents
Advertisement
SECTION 1 - SPECIFICATIONS
Base Footprint
VP Series - 32 in. (81cm) width 56 in. (1.42m) length
Max. Platform Height (mast extended)
10VP – 10 ft. 6 in.(3.2m)
15VP – 15 ft.(4.5m)
20VP – 19 ft. 9 in.(5.9m)
Platform Working Height (average)
10VP –16 ft. 6 in.(4.8m)
15VP –21 ft.(6.4m)
20VP –25 ft. 9 in.(7.6m)
Machine Drive Speed (max.)*
Platform Lowered - 2 mph (3.22 kph)
Platform Elevated - 0.5 mph (.81 kph)
(reduced by limit switch)
* Variable to maximum with speed cut back.
Amperage Draw (average)
Lift - 12 amps.Drive - 20 amps.
Interlock Switch Operating Conditions
Table 1-4. shown, lists machine response to various inter-
lock switch positions.
1.4 TORQUE REQUIREMENTS
When maintenance becomes necessary or a fastener has
loosened, refer to the Torque Chart, Figure 1-3., Torque
Chart. to determine proper torque value.
Mast Elevation
mast retracted
mast retracted
mast extended
mast extended
mast extended
mast retracted
mast retracted
1-2
Table 1-4. Machine Interlock Switch Operating Conditions.
Drive Cutout
(PHP System)
bars raised
bars raised
bars lowered
bars raised (blocked)
bars lowered
bars raised
bars raised/battery charger
plugged-in
1.5 LUBRICATION
Hydraulic Oil
Hydraulic oils must have anti-wear qualities at least to API
Service Classification GL-3, and sufficient chemical stabil-
ity for mobile hydraulic system service. JLG Industries,
recommends Mobilfluid 424 hydraulic oil, which has an
SAE viscosity of 10W-30 and a viscosity index of 152.
For cold weather applications, i.e. when temperatures
remain consistently below +20°F (–7°C) JLG recom-
mends using Mobil DTE 13 hydraulic oil.
Aside from JLG recommendations, it is not advisable to
mix oils of different brands or types, as they may not con-
tain the same required additives or be of comparable vis-
cosities. If use of hydraulic oil other than Mobilfluid 424 is
desired, contact JLG Industries for proper recommenda-
tions.
Table 1-2. Hydraulic Oil Operating Range
HYDRAULIC SYSTEM OPERATING
TEMPERATURE RANGE
0° F to +23° F
(-18° C to -5° C)
0° F to +210° F
(-18° C to +99° C)
50° F to 210° F
(+10° C to +210° C)
Lubrication Specifications
Table 1-3. Lubrication Specifications
KEY
Multipurpose Grease having a minimum dripping point
of 350° F. Excellent water resistance and adhesive qual-
MPG -
ities, and being of extreme pressure type. (Timken OK
40 pounds minimum.)
Extreme Pressure Gear Lube (oil) meeting API service
EPGL -
classification GL-5 or MIL-Spec MIL-L-2105.
HO
-
Hydraulic Oil. ISO-Vg grade 32, 46.
Tilt Status
Brake Status
(not tilted)
engaged
(not tilted)
disengaged
(not tilted)
engaged
(not tilted)
engaged
(tilt)
engaged
(tilt)
engaged
(not tilted)
engaged
– JLG Lift –
SAE VISCOSITY
GRADE
10W
10W-20, 10W-30
20W-20
SPECIFICATIONS
Controller Response
Full Drive and Lift
Drive and Lift Disabled
Drive 25% maximum
Drive Disabled
Drive and Lift disabled
Lift Disabled
Drive Disabled
3120728
Advertisement
Chapters
Table of Contents
Troubleshooting
