Download Error Message Displays; Where To Program Ip Resources - Mitel Inter-Tel 5000 Installation And Maintenance Manual

Download Error Message Displays

The endpoint displays error information concerning the status of the last TFTP application
image update (firmware or boot code) not only on the LCD but also on the Web interface. The
error message is displayed under Status\Image Upgrade\Last Download Error.
the possible error messages.
Table 5-19.
ERROR TFTP FAIL
ERROR TFTP FAIL
START
ERROR BAD FLASH
ERROR TFTP
TIMEOUT
ERROR WRONG
VERSION
ERROR WRONG
PLATFORM
ERROR MISC
ERROR
ERROR NOT GZIP
ERROR INVALID
FILE ID
ERROR
INCOMPATIBLE HW
ERROR FILE TOO
BIG
ERROR BOOT
IMAGE CORRUPT
ERROR ALLOCATE
FAILURE
ERROR FAILED
VERIFY

Where to Program IP Resources

Program IP resources in DB Programming. Refer to the Inter-Tel 5000 Features and
Programming Guide (part no: 580.8006).
®
Inter-Tel 5000 Installation Manual – Issue 2.4, May 2008
Image Download Error Message Displays
Display
The image download process failed because of one of the following
problems:
•
The endpoint cannot contact the TFTP server.
•
The TFTP server does not have the software image file.
•
The TFTP image URL contains the wrong path.
•
The TFTP server does not have the permission to read the
software image file.
The endpoint failed to start TFTP client. This problem could be due to
an insufficient file descriptor for TFTP, etc.
The image download process failed because of a faulty flash memory
device or the flash file system is corrupted. If the user encounters this
error, replace the device.
The endpoint failed to communicate with the TFTP server. This error
could be due to bad network connectivity.
The image contains an unexpected software version.
The image contains an unexpected platform identifier.
Miscellaneous errors include a corrupted file system, unrecognized
error by the TFTP library, etc.
The image is not in GZIP format.
The image does not contain the appropriate file identifier.
The image contains the wrong hardware ID.
The file that the endpoint downloaded for upgrade is too large.
The boot image downloaded is corrupt.
The endpoint was unable to allocate enough memory to download the
image.
The image written to flash does not match the file downloaded. A
write error occurred.
Chapter 5: Installation
Download Error Message Displays
Table 5-19
Description
lists
Page 5-121