Additional Information; Ct Gateway - Mitel Inter-Tel 5000 Installation And Maintenance Manual

Chapter 4: Specifications

CT Gateway

CT Gateway
System OAI Level 2 applications can be used in conjunction with the CT Gateway. The CT
Gateway provides a TCP/IP System OAI interface that supports a network. As far as the
System OAI streams are concerned, each node in a network functions individually. The user
cannot program a System OAI serial port on Node 1 that will control devices or receive events
for other nodes. If the user needs to control devices on multiple nodes, they must install a CT
Gateway. The CT Gateway receives the OAI streams from multiple nodes and consolidates
them into a single stream for a System OAI application. The CT Gateway sends and receives all
of its data via TCP/IP connections.
For details, refer to the CT Gateway Installation Manual, part no. 835.2161. For environmental
requirements, see

Additional Information

If necessary, contact the Inter-Tel CommSource division for additional information about the
following optional equipment:
•
•
•
•
•
•
•
•
•
•
•
Page 4-60
page 4-4.
Standby Power (system battery back-up)
Uninterruptible Power Supply (UPS)
Lightning and AC Surge Protection
Headsets
Paging Equipment
Single Line Endpoints
Cordless Telephones
Music-On-Hold
OPX Repeaters
Facsimile Machine
Playback Devices
®
Inter-Tel 5000 Installation Manual – Issue 2.4, May 2008