The next two screenshots indicate the changes in the window appearance for both the "Image" window
and the "Config" window:
Above is the "Image" window. Note the changes from the basic user interface mode. The available
functions are described here:
Nonlinear Contrast Enhancement – Selects between a linear image remapping algorithm and a
non-linear image remapping algorithm to remap the 16 bit data to an 8 bit analog output stream.
Contrast Stretch – Stretches the contrast to enhance the detail within the image.
Exposure – Selects automatic or manual exposure mode and allows the user to adjust the
exposure in manual mode by sliding the slide bar.
Noise Suppression – Enable or disable the automatic noise suppression algorithm and adjust the
level of noise filtering applied in manual mode.
10-10032-01
Rev A1
2011 FLIR Advanced Imaging Systems
Tau CNV Camera User's Manual
ECO: 594
page 46 of 49