Group Interface; Group Interface Default Settings; Figure 7: Group Interface Back Panel View; Table 4: Group Interface Default Configuration - FLIR Tau CNV User Manual

6.2 Group Interface

The Tau CNV group interface supports: (1) Camera Link control and digital video output; (2) USB /
RS232 (future) camera control and analog video output; (3) trigger input/output; and (4) video IRIS
(future).

6.2.1 Group Interface Default Settings

The table below shows the group output default settings
Function
Trig IN/OUT
Trigger Mode
Video Output
Camera Link
USB
RS232 (future, do not use)
VIDEO IRIS (future, do not
use)
10-10032-01
Rev A1

Figure 7: Group Interface Back Panel View

Table 4: Group Interface Default Configuration

2011 FLIR Advanced Imaging Systems
Tau CNV Camera User's Manual
Default Condition
Not Active
Free Running
Active, NTSC Analog
Enabled / Active
Enabled / Active
Disabled (all modes)
Disabled (all modes)
ECO: 594
page 22 of 49