Control - Chroma -Q Color Block 2 User Manual

The end plates feature two complete sets of fixture fixing holes. Set one hold the fixtures
closely together ensuring equal centres for all sixteen cells. Sets two are adjustable and allow
the Color Block 2 fixtures to be splayed out at varying angles.
f. Hinge kit
The hinge kit is supplied as one complete hinge with fibre washers and M10 bolts.
The hinge kit fits between two Color Block 2 fixtures and offers an angle adjustment of 180 deg.
If used in multiples, unique shapes can be achieved, such as hexagons, octagons etc.
g. Wall bracket for single fixture
The Wall bracket for single fixture is a discreet fixing suitable for fixing a single Color Block 2 to
a wall or set piece. Keyhole slots are provided to for vertical or horizontal fixing.

2.4 Control

The Chroma-Q Color Block 2 is controlled via two models of addressable ANSI E1.11 USITT
DMX512-A power supply units, the 5 way Color Block PSU-05B and the 30 way Color Block
PSU-30.
The Color Block PSU-05B and PSU-30 menu items are accessed via the LCD display and the
following controls:
• Right hand button (red) = Enter (hold for 2 seconds to save)
• Left hand button (blue) = Exit without saving
• Wheel = Adjusts values or scrolls through menu items
The LCD screens shown above are currently at the Home position and display: product name
and model, software version, current DMX address, current control mode and time.
Color Block 2 User Manual 9 V1.0 April 2009