Mounting; Orientation; Cyc & Border Lens; Control - Chroma Color Force 72 User Manual

5 Spare Data Plus
Power Cable:
International
Colour Code
Green and Yellow
Blue
Brown
Important Notice: The use of an opto-splitter for DMX signal distribution is highly
recommended when several fixture units are not plugged into the same power source.

2.3 Mounting

The Color Force 72 & 48 fixtures are equipped with built-in mounting brackets for floor, wall and
truss mounting applications. The mounting brackets feature a pair of quick release levers for
easy tilt adjustment.
Note: Secure the fixture with a safety bond. Provision for a fixing hold is built into the brackets.

2.4 Orientation

The Color Force 72 & 48 fixtures are built with near/far lenses that optimize the beam spread
when used on a wall or cyclorama. The side with near-field lenses is indicated by the narrow
edge border, which should be adjacent to the wall or cyclorama. The side with far-field lenses is
indicated by the wider edge border, which should be facing away from the wall or cyclorama.
Narrow
Wider
2.5 Cyc & Border Lens
"Cyc Lens" and "Border Lens" are slide-in optical accessories available to adjust the light output
of the Color Force 72 & 48 fixtures to suit a wide range of applications. Two accessory slots are
available at the front of the fixture to hold these slide-in Lens.
The Cyc Lens is an acrylic panel with 60º x 10º diffusion film. The Border Lens is an acrylic panel
with 40º x 40º diffusion film. Matching indentations on both ends of both panels are available for
locking.
Spring Plungers are pre-installed at the far ends of both accessory slots to lock in-place the
slide-in panels. The height of the spring plungers are preset and fixed with no need for further
adjustment.

2.6 Control

Color Force User Manual
North American
Colour Code
Green
White
Black
Wall or Cyclorama
Audience
4
Connections
Earth (E)
Neutral (N)
Live (L)
Ground (Green)
Neutral (Silver)
Hot (Gold)
V2.0 October 2011