Chroma -Q Color Block 2 User Manual page 9

b. Batten bracket kit for up to five fixtures
The batten bracket set is supplied as a pair of brackets with fibre washers and thumb wheels.
The batten bracket set can be used for floor mounting (see photo), direct wall mounting and
truss mounting when used in conjunction with hook clamps or half couplers.
c. Yoke kit for single fixture
The yoke kit for single fixture is supplied as a yoke bracket with fibre washers and thumb
wheels.
The yoke kit can be used for floor mounting (see photo), direct wall mounting and truss
mounting when used in conjunction with hook clamps or half couplers.
d. Dual mode yoke kit for single fixture
The dual mode yoke kit for single fixture is supplied with fibre washers and thumb wheels. The
dual mode yoke combines the function of the single yoke and the batten bracket.
e.
Blinder frame for four fixtures
The blinder frame is supplied as a yoke bracket, side plates, fibre washers, thumb wheels and
eight M10 bolts.
The blinder frame is designed to truss mount with the use of a half coupler.
Color Block 2 User Manual
The Color Block 2 fixture is supplied with an integral M10
clinch nuts at each end. These can be used to attach the
Color Block 2 fixture to a standard hook clamp.
Note: damage may occur if the bolt is too long. (M10x16
maximum)
8 V1.0 April 2009