MODULAR ROOF BARS
1
A
Before transporting a load on the mod-
ular roof bars, they must be set to their
operating position:
– Unclip the levers 1 (movement A);
– Raise the bars sufficiently to allow
them to be pivoted (figure B);
– Lock the bars in the transverse
position by clipping the levers 1
(figure C);
– Check that they are correctly locked.
3.44
(1/2)
When handling, ensure that the
bars do not touch the vehicle roof as
they may scratch the roof.
It is strictly forbidden to place the
modular roof bars in the transverse
position (carrying position) when
entering a roller-type car wash.
B
Make sure that the two roof
bars are correctly posi-
tioned and locked.
Maximum weight on each roof bar:
40 kg evenly distributed (80 kg over
two roof bars).
C