Call Forwarding; Overview Of Forwarding Types - Siemens HiPath 4000 Operation Manual

Step by step

Call forwarding

If your belongs to an ONS group (parallel call
page 70), please note the following:
Call forwarding can be configured on any phone
in the ONS group and will then apply to all pho-
nes in that ONS group.
Call forwarding between two phones in an ONS
group is not possible.

Overview of forwarding types

You can configure different call forwarding settings for
your station.
Variable call forwarding
Fixed call forwarding
Forwarding for intnl
Forwarding for extnl
Call forwarding - busy
Call forward. no reply
Call forward. busy/no reply If your station is busy or
[1] This duration is defined by your service personnel.
Apart from "Forwarding for intnl" and "Forwarding for
extnl", the call forwarding types preclude each other. For
the two exceptions, you can program and activate one
call forwarding destination.
Making Calls – Basic Functions
All calls are forwarded to
the saved phone number,
the phone number is dele-
ted after deactivation.
All calls are forwarded, the
saved phone number is
not deleted after deactiva-
tion.
Only internal calls are for-
warded.
Only external calls are for-
warded.
If your station is busy, all
calls are forwarded.
If you do not answer a call,
all calls are forwarded
after a certain length of ti-
me.
you do not answer a call,
all calls are forwarded af-
ter a certain length of ti-
[1]
me .
[1]
25