Changing The Maximum Output (Hi) For Ch Operation - REMEHA Avanta Range 24c Installation & Service Manual

fi g. 44 Change parameters in service level
LT.AL.W7H.000.047
fi g. 45 Change boiler output
LT.AL.W7H.000.048

R
Changing the factory settings could result in the boiler not
working properly.
The parameters can be changed from the stand-by status as
follows:
• Press the [enter]-key and briefly the [reset]- key until codes
• Press the [+]-key until access code 12 is displayed.
• Press the [enter]-key until p1 appears (codes p [ and
• This parameter can now be changed as follows;
• Press the [enter]-key; the set value for the maximum flow
• Press the [+] or [-]-key to change this value, for example to
• Press [enter]-key to confirm the value; codes p [ and [
• Press the [+]-key to change the next parameter, etc.
• Press [reset]-key to return to the operating mode.

The boiler will automatically return to the normal operating
mode if no keys are pressed for 10 minutes.
2.9.9
The maximum output for CH operation can be changed with
parameter p 17 (maximum fan speed) and is set stand-
R
ard to a speed of 3500, 3700, 4100 or 5000 rpm for the four
Combi-types and 3600, 3700 or 5200 rpm for the three Sys-
tem-types. See the speed-input ratio figures.
This parameter can be changed from the stand-by status as
follows:
• Press the [enter]-key and briefly the [reset]- key until codes
• Press the [+]-key until access code 12 is displayed.
• Press the [enter]-key until p1 appears (codes p [ and
• Press the [+]-key to go to parameter 17.
• Press the [enter]-key until p17 appears (codes p [
• Press the [+] or [-]-key to change this value for Avanta Plus
• Press [enter]-key to confirm the value.
• Press [reset]-key to return to the operating mode.
40
Remeha Avanta Plus
c and 0 appear alternately in the display.
[ 1 are displayed alternately);
temperature now appears e.g.; 75 (75°C).
65 (65°C).
1 are displayed alternately.
Changing the maximum output (Hi) for CH
operation
c and 0 appear alternately in the display.
[ 1 are displayed alternately);
and 17 are displayed alternately);
28c, for example to 46 (4600 rpm corresponds with 22 kW).