Show Bridge-Ext; Switchport Gvrp - Korenix JetNet 5228G Series User Manual

4
Command Line Interface

show bridge-ext

This command shows the configuration for bridge extension commands.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
See "Displaying Basic VLAN Information" on page 3-172 and "Displaying
Bridge Extension Capabilities" on page 3-16 for a description of the displayed
items.
Example
Console#show bridge-ext
Max Support VLAN Numbers:
Max Support VLAN ID:
Extended Multicast Filtering Services: No
Static Entry Individual Port:
VLAN Learning:
Configurable PVID Tagging:
Local VLAN Capable:
Traffic Classes:
Global GVRP Status:
GMRP:
Console#

switchport gvrp

This command enables GVRP for a port. Use the no form to disable it.
Syntax
[no] switchport gvrp
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Example
Console(config)#interface ethernet 1/6
Console(config-if)#switchport gvrp
Console(config-if)#
4-222
256
4094
Yes
IVL
Yes
No
Enabled
Disabled
Disabled