Korenix JetNet 5228G Series User Manual page 131

CLI – This example sets the 802.1X parameters on port 2. For a description of the
additional fields displayed in this example, see "show dot1x" on page 4-124.
Console(config)#interface ethernet 1/2
Console(config-if)#dot1x port-control auto
Console(config-if)#dot1x re-authentication
Console(config-if)#dot1x max-req 5
Console(config-if)#dot1x timeout quiet-period 30
Console(config-if)#dot1x timeout re-authperiod 1800
Console(config-if)#dot1x timeout tx-period 40
Console(config-if)#dot1x intrusion-action guest-vlan
Console(config-if)#exit
Console(config)#exit
Console#show dot1x
Global 802.1X Parameters
system-auth-control: enable
802.1X Port Summary
Port Name Status
1/1 disabled
1/2 enabled
. .
.
1/10 disabled
802.1X Port Details
802.1X is disabled on port 1/1
802.1X is enabled on port 1/2
reauth-enabled: Enable
reauth-period: 1800
quiet-period: 30
tx-period: 40
supplicant-timeout:
server-timeout: 10
reauth-max: 2
max-req: 5
Status Authorized
Operation mode Single-Host
Max count 5
Port-control Auto
Supplicant 00-12-CF-49-5e-dc
Current Identifier 3
Intrusion action Guest VLAN
Authenticator State Machine
State Authenticated
Reauth Count 0
Backend State Machine
State Idle
Request Count 0
Identifier(Server) 2
Reauthentication State Machine
State Initialize
. .
.
802.1X is disabled on port 1/10
Console#
Operation Mode Mode
Single-Host ForceAuthorized
Single-Host auto
Single-Host ForceAuthorized
30
3
Authentication
4-172
4-120
4-122
4-119
4-122
4-123
4-123
4-124
4-124
Authorized
n/a
yes
n/a
3-85