Korenix jetnet 3705 series industrial power over ethernet switch (25 pages)
Summary of Contents for Korenix JetNet 5010G
Page 1
Korenix produces this portable demo box. In this limited box space, Korenix organizes Korenix products for the best results, and impresses customers with not only product introduction, but also live demonstration.
Page 2
Default settings are as follows: The default IP of JetNet5010G is: 192.168.10.1/255.255.255.0 The default username and password are: admin/admin Connect Ethernet to PC and JetNet 5010G as below.
Page 3
Preparation for Web Interface JetNet 5010G provides HTTP Web Interface and Secured HTTPS Web Interface for web management. 1. Launch the web browser (Internet Explore or Mozila Firefox) on the PC. 2. Type http://192.168.10.1 and then press Enter. 3. The login screen will appear next.
Page 4
In JetNet 5010G package, Korenix attached one RS-232 DB9 to RJ-45 console cable. Please attach RS-232 DB9 connectors to your PC COM port, connect RJ-45 to the console port of the JetNet 5010G. 1. Go to Start -> Program -> Accessories -> Communication -> Hyper Terminal.
Page 5
JetView JetView is a window utility which can do auto discovery, grouping IP settings, group firmware upgrade and group configuration file backup/ restore, it also supports multi-platform features. Note: please disable the firewalls of your PC or laptop, the firewall enable may cause some unexpected results.
Need help?
Do you have a question about the JetNet 5010G and is the answer not in the manual?
Questions and answers