Korenix JetNet 5228G Series User Manual page 197

CLI – This command displays global STA settings, followed by settings for each port.
Console#show spanning-tree
Spanning Tree Information
---------------------------------------------------------------
Spanning Tree Mode:
Spanning Tree Enabled/Disabled:
Instance:
VLANs Configuration:
Priority:
Bridge Hello Time (sec.):
Bridge Max Age (sec.):
Bridge Forward Delay (sec.):
Root Hello Time (sec.):
Root Max Age (sec.):
Root Forward Delay (sec.):
Max Hops:
Remaining Hops:
Designated Root:
Current Root Port:
Current Root Cost:
Number of Topology Changes:
Last Topology Change Time (sec.): 4291
Transmission Limit:
Path Cost Method:
Eth 1/ 1 Information
---------------------------------------------------------------
Admin Status:
Role:
State:
External Admin Path Cost: 0
Internal Admin Path Cost: 0
External Oper Path Cost:
Internal Oper Path Cost:
Priority:
Designated Cost:
Designated Port:
Designated Root:
Designated Bridge:
Fast Forwarding:
Forward Transitions:
Admin Edge Port:
Oper Edge Port:
Admin Link Type:
Oper Link Type:
Spanning Tree Status:
. .
.
Note: The current root port and current root cost display as zero when this device is not
connected to the network.
Spanning Tree Algorithm Configuration
MSTP
Enabled
0
1-4094
32768
2
20
15
2
20
15
20
20
32768.0.0016B6F03BEC
0
0
0
3
Long
Enabled
Designate
Forwarding
100000
100000
128
0
128.1
32768.0.0016B6F03BEC
32768.0.0016B6F03BEC
Enabled
1
Enabled
Enabled
Auto
Point-to-point
Enabled
3
4-218
3-151