Table of Contents
Advertisement
3.4
Environmental Specifications
3.4.1
Temperature
Operating: (with Kontron Embedded Modules GmbH heat-spreader plate assembly):
Ambient temperature: 0 to +60 °C
®
Maximum heatspreader-plate temperature: 0 to +60 °C (*)
®
Non-operating: -30 to +85 °C
®
See the
T hermal Management
X
Note:
*The maximum operating temperature with the heatspreader plate is the maximum measurable temperature
on any spot on the heatspreader's surface. You must maintain the temperature according to the above
specification.
Operating (without Kontron Embedded Modules GmbH heat-spreader plate assembly):
Maximum operating temperature: 0 to +60 °C (**)
®
Non operating: -30 to +85 °C
®
See the
T hermal Management
X
Note:
**The maximum operating temperature is the maximum measurable temperature on any spot on a module's
surface. You must maintain the temperature according to the above specification.
3.4.2
Humidity
Operating: 10% to 90% (non condensing)
®
Non operating: 5% to 95% (non condensing)
®
Kontron User's Guide ETX®-CN8
chapter for additional information.
X
chapter for additional information.
X
15
3 Specifications
Advertisement
Table of Contents
