Sanyo PLV-WF10 Service Manual page 37

Group & Item No.
200-11 & 12 PC White balance adjustment. 2 lamp mode
210-11 & 12 AV White balance adjustment. 2 lamp mode
211-11 & 12 AV White balance adjustment. Lamp-1 of 1 lamp mode
212-11 & 12 AV White balance adjustment. Lamp-2 of 1 lamp mode
1000-25
1000-24
1010-0
1010-1
1010-2
1010-3
1010-4
1010-5
0-0 Temperature monitor IC5801 Read only
0-1 Temperature monitor IC2561 Read only
1-0
Atmospheric Pressure monitor
10-0 RS232C Baud rate (0:9600 / 1:19200)
10-1
RS232C RTS/CTS Flow Control (0:Disable / 1:Enable)
111-0 Lamp-1 Lamp illumination time
111-1 Lamp-2 Lamp illumination time
930-0 Lamp mode 2 (Full) Lamp Mode
930-1 Lamp mode Lamp-1 of 1 Lamp Mode
930-2 Lamp mode Lamp-2 of 1 Lamp Mode
998-0 Grid Test Pattern Display
Note :
Group-no. 930
If the data value appears "11" on the screen, the lamp
mode is selected.
If the data value appears "0" on the screen, the lamp
mode is not selected. Set the data value to "10."
If the data value appears "99" on the screen, it is period
for cooling of the lamp. Wait until it is changed to "0."
Then set the data value to "10."
Adjustment Item
AV Color adjustment
AV Tint adjustment
AV Green Video signal adjustment
AV Green Video signal adjustment
AV Red Video signal adjustment
AV Red Video signal adjustment
AV Blue Video signal adjustment
AV Blue Video signal adjustment
IC886 Read only
Not designated
Read only
Read only
(See Note.)
(See Note.)
(See Note.)
Caution :
Other adjustment items are not related to service and a main-
tenance. Don't change the data values of those adjustment
items. Otherwise it may cause loss of product safety.
-37-
Input Mode
PC AV Component