Table of Contents
Advertisement
M
AINTENANCE
FALL START UP:
Prior to lighting the first fire check the outside area around the exhaust and air intake systems for obstructions.
Clean the screens on the exhaust system and the outside air intake pipe. Turn all controls on to make sure they
are working prior to lighting the first fire. Clean and remove fly ash from exhaust venting.
SPRING SHUTDOWN:
After the last burn in the Spring, remove pellets from the hopper and the auger. Scoop out the pellets then run
the auger until the hopper is empty and pellets stop flowing. Vacuum out the hopper. Thoroughly clean the
burn grate, burn box, ash drawer and ash traps. The exhaust system should be thoroughly cleaned. Remove the
Exhaust Manifold access panel and clean the exhaust manifold and the Combustion Blower blades and housing.
Inspect Exhaust Manifold access panel gasket and replace access panel. Leave unit unplugged for summer sea‐
son for added electrical protection.
Many Hearthland Authorized Dealers as well as NFI or WETT Certified Pellet Specialists offer yearly cus‐
tomer service contracts. The advantages of these are they establish an ongoing, mutually beneficial
relationship with a qualified service technician. Many will offer an end of the season service such as a
through cleaning and equipment inspection and repair or replacement, if necessary.
VS0952_E
R
AND
EQUIRED
SERVICE CONTRACTS
12/30/2009
C
(C
LEANING
ONTINUED
)
35
Advertisement
Table of Contents
