O
PERATING
NOTE: To operate in either of the two thermostat modes, an optional thermostat kit must be purchased and
installed. Thermostats compatible with your Hearthland stove are available from your local dealer.
Thermostat Modulated Mode has advantages over Thermostat ON/OFF mode.
⇒
More consistent room temperature will be maintained.
⇒
Life of the Auto Igniter is increased, seeing fewer ignition cycles.
⇒
The stove will tend to operate primarily at the low setting, resulting in more efficient use of energy to
maintain desired temperature setting.
THERMOSTAT MODULATED MODE (HIGH‐LOW)
This feature of your stove allows for modulated heating with use of a thermostat connected to the ITC. In this
mode your stove will run at the heat setting 2,3 or 4 when the thermostat calls for more heat, and drop to heat
setting 1 when the set room temperature is achieved. This makes your stove more responsive to your heating
needs, and eliminates the need to re‐ignite with each heat demand cycle.
TO START
⇒
To operate in High Low thermostat mode, press the START touch pad to activate the stove as described
in section #4.7 "Starting Stove & Shutting Off Stove".
⇒
Select desired HIGH heat output level (2,3 or 4 position) by pressing the START / HEAT LEVEL touch pad.
⇒
Select desired FAN SPEED setting as described in section #4.8 "Setting Fan Speed".
⇒
Once settings are selected your high HEAT LEVEL and FAN SPEED LED's will flash while your stove goes
through the initial start up cycle.
⇒
Upon completion of startup cycle, the stove will cycle between HEAT LEVEL 1
and the high setting selected (2,3 or 4 position) the HEAT LEVEL indicator
light will light indicating its current setting.
TO SHUT DOWN
⇒
To turn off the appliance press the OFF touch pad per section #4.7 "Starting Stove & Shutting Off Stove".
THERMOSTAT ON‐OFF MODE
In this mode the thermostat is set at the desired room temperature. If the room temperature drops below the
level on the thermostat the stove will automatically light and operate at HEAT LEVEL setting 2,3 or 4 until the
temperature setting is reached at which time the stove will shut down.
TO START
⇒
Press START to activate the stove per section #4.7 "Starting Stove & Shutting Off Stove".
⇒
Select desired HIGH heat output level (2,3 or 4 position) by pressing the START / HEAT LEVEL touch pad.
NOTE: The Heat Level can be adjusted between setting 2‐4 at any time.
⇒
Select desired FAN SPEED setting as described in section #4.8 "Setting Fan Speed".
TO SHUT DOWN
⇒
To turn off the appliance press the OFF touch pad per section #4.7 "Starting Stove & Shutting Off Stove".
Note: If in THERMOSTAT ON‐OFF MODE the stove turns off and on frequently, we suggest you turn the HEAT
LEVEL to a lower setting so that it stays on for longer periods. This will result in a more consistent room tempera‐
ture.
VS0952_E
I
NSTRUCTIONS
12/30/2009
(C
)
(C
)
ONTINUED
ONTINUED
29