Running Fsm - FLIR F-Series Installation Manual

2 Basic Operation and Configuration
Manager User Manual. Once the software is installed, the manual is available from the Windows
Start Menu. If the FSM software has not been installed yet, locate the CD that came with the camera
and install it on the PC. The latest version of the software is also available from http://support.flir.com/
in the Downloads page.
2.4.1
Run the FSM software by double clicking the FLIR Sensors Manager icon on the desktop, or click on
the Windows Start button and select Programs > FLIR Sensors Manager > FLIR Sensors Manager.
Initially the FLIR Sensors Manager splash screen will be displayed. After a brief while, the FSM main
window will appear. A popup FSM Notification window will appear in the lower right of the screen
indicating that no cameras (servers) have been discovered yet.
Click on the Accept button to acknowledge the notification.
The FLIR Sensors Manager uses a "client/server" architecture. The FSM
software is considered a client, and the cameras are considered servers or
sensors. The Sensors Panel in the upper left of the window indicates no
sensors have been discovered and added to the list of Active Sensors.
No sensors
discovered initially
Control Panel -
Pan/Tilt/Zoom controls
Click on Setup, if required, then the Discovery button on the side panel to bring up the Discovery
Panel. The FSM software can automatically discover FLIR cameras on the network.
427-0030-00-12, Version 170

Running FSM

Video Wall 0
Setup
Move to Active Sensors
Refresh
Mar 2014
Discovery
2-7