F-Series Camera Specifications - FLIR F-Series Installation Manual

1 F-Series Camera Installation
1.8
THERMAL CAMERA SPECS
Resolution
Detector Type
Pixel Pitch
Focal Length (lens/model dependent)
Field Of View (lens/model dependent)
Zoom (model dependent)
Spectral Range
Focus Range
OUTPUTS
Composite Video NTSC or PAL
Video Over Ethernet
CONTROL
Point To Point (stand alone)
Ethernet
Serial
Network Enabled
GENERAL
Weight
Dimensions (L,W,H)
Power Requirements
Power Consumption
Inrush Current
ENVIRONMENTAL
Dust, Water Protection Rating
Operating Temperature
Note
Power consumption is independent of the input voltage when the heater is off. The power drawn by
the heaters increases with the input voltage to a maximum at 30 Volts.
427-0030-00-12 Rev170

F-Series Camera Specifications

Cold start
160 x 120 320 x 240
Long-Life, Uncooled
VO× Microbolometer
25 μm 25 μm
9 mm, 13 mm, 19 mm 9 mm, 13 mm, 19 mm,
35 mm, 65 mm, 100 mm
24° × 20° (F-124; 9 mm) 48° × 39° (F-348; 9 mm)
17° × 14° (F-117; 13 mm) 34° × 28° (F-334; 13 mm)
12° × 10° (F-112; 19 mm) 24° × 19° (F-324; 19 mm)
13° × 10° (F-313; 35 mm)
7° × 5° (F-307; 65 mm)
4.6° × 3.7° (F-304; 100 mm)
2× E-zoom 2× & 4× E-zoom
Athermalized, focus-free
Standard
Two independent channels of streaming MPEG-4, H.264, or M-JPEG
Standard
Standard
RS-232/-422; Pelco D, Bosch
Standard
9.5 lb (configuration dependent)
18.1" × 5.5" × 6.3" (460 mm × 140 mm × 160 mm)
24 VAC (21-30 VAC)
24 VDC (21-30 VDC)
24 VAC: 15 VA max no heater, 51 VA max w/heater
24 VDC: 10 W max no heater, 46 W max w/heater
<5 A for DC power supply with slew rate > 10 ms
<19 A for AC power supply with slew rate > 4.17 ms
IP66
-50°C to +70°C (-58°F to +158°F);
-40°C to +70°C (-40°F to +158°F)
Mar 2014
640 x 480
17 μm
13 mm, 25 mm, 35 mm,
50 mm, 65 mm, 100 mm
45° × 37° (F-645; 13 mm)
25° × 20° (F-625; 25 mm)
18° × 14° (F-618; 35 mm)
12° × 10° (F-612; 50 mm)
10° × 8° (F-610; 65 mm)
6.2° × 5° (F-606; 100 mm)
2× & 4× E-zoom
Continuous e-zoom
on F-6xxE models
1-11