Hydraulic Hose - Wittke StarLight Maintenance Manual

Part #: 90309
H H
YDRAULIC OSE
Labrie Environmental Group uses premium quality hydraulic
hose designed specifically for use in our hydraulic systems. All
pressure hoses have a maximum working pressure of at least
3000 psi, with a x4 burst pressure rating. The hydraulic hose
type is identified on the hose covers, in the "lay line". When
replacing any hydraulic hose, it is extremely important that the
replacement hose carries the same SAE rating as the original
hose.
Hose types are listed by a designation or number set by a
regulatory authority such as ISO and the SAE (Society of
Automotive Engineers). These regulatory bodies set standards
in the hydraulic hose industry.
I
NSPECT ALL HYDRAULIC HOSES AND TUBING DAILY FOR ABRASION
,
CUTS CRACKS AND DAMAGE
R
EPLACE ANY HYDRAULIC HOSE WHICH SHOWS SIGNS OF DAMAGE
CAUTION
.
,
.
75