Table of Contents
Advertisement
M
AINTENANCE
Part #: 90309
L
IABILITY
Labrie Environmental Group assumes no liability for any
incidental, consequential or other liability from the use of this
information. All risks and damages, incidental or otherwise,
arising from use or misuse of the information contained herein
are entirely the responsibility of the user. Although careful
precaution has been taken in the preparation of this material, we
assume no responsibility for errors or omissions.
W
ARNING
Prior to using your new S
Loader, it MUST BE COMPLETELY LUBRICATED as shown on
the lube decal located near the rear of the body on the
passenger side. (Also see Lubrication section in the
Maintenance Checklist).
Initial lubrication carried out by Labrie Environmental Group is
sufficient for production and transport purposes ONLY!
With your safety in mind, we would like to remind you that ONLY
QUALIFIED PERSONNEL should service the hydraulic,
electrical, and pneumatic systems on your refuse vehicle. In
addition, these mechanics should be fully versed in the
operation of this unit. Please read the Operator Manual, prior to
attempting any maintenance of your Wittke Front Loader.
L
C
IFTING
OMPONENTS FOR
Lifting components of the W
safety.
Before attempting these lifts:
•
Empty the body.
•
Chock both the front and rear wheels.
•
Stand clear of any cranes or similar lifting devices
when doing any lifts.
•
Do not stand or walk under a load that is suspended
unless there are additional safety blocking devices
in place.
™ or S
TARLIGHT
UPERDUTY
S
requires special attention to
ITTKE
™ Front
ERVICE
1
Hide quick links:
Advertisement
Table of Contents
