Table of Contents
Advertisement
Front header
end cylinder pin
bolts
86
Grease fitting
hoses
4.
Remove packer end cylinder pins.
5.
Secure both cylinders to avoid them falling on the body
floor.
6.
Get out of the hopper and close the side access door.
7.
Start the engine and turn on the hydraulic pump.
8.
Retract packer cylinders.
9.
Remove hoses and front header end pins from both
cylinders.
10.
To reinstall cylinders, perform the reverse procedure.
Part #: 90309
Hide quick links:
Advertisement
Table of Contents
