Lifting The Entire Body - Wittke StarLight Maintenance Manual

4
L
IFTING THE
Note:All the ratings provided below are the minimum
values.
Lifting the W
rear, to a lift beam. To do so, you will need two 3000-lb
(1361 kgs) rated slings (rear, see picture below), two 3000-lb
rated shackles (rear), two 6000-lb (2722 kgs) rated slings
(front), one 12000-lb (5443 kgs) lift beam (front), one 6000-lb lift
beam (rear) and one 18000-lb (8165 kgs) overhead crane. You
can also use a 12000-lb overhead crane at the front of the body
and one 6000-lb overhead crane at the rear.
Shackle 1. Perform step 1 to step 5 of the Lifting the Front Body
section.
2. Install a 3000-lb shackle on both holes located on top of
the body, near tailgate hinges.
E B
NTIRE ODY
body requires securing both ends, front and
ITTKE
Part #: 90309