Packer Fully Extended Proximity Switch - Wittke StarLight Maintenance Manual

Part #: 90309
P F
ACKER ULLY
S
WITCH
This proximity switch stops the packer when it reaches its fully
extended position (pack cycle).
This proximity switch is mounted on the front wall of the body, on
the street side.
T
HIS PROCEDURE MUST BE PERFORMED BY TWO PEOPLE
Testing procedure:
1. Empty all refuse from the body.
2. Initiate a pack cycle and observe the fully extended
position of the packer. Adjust the Packer fully extended
proximity switch if:
• The packer stops before or after reaching the fully
extended position (see picture below).
Adjustment procedure:
1. Move the packer so it is aligned with the breaker bar.
2. Adjust the proximity switch so it is active (the amber light
on the proximity switch should be ON) when the packer
E P
XTENDED ROXIMITY
IMPORTANT
Packer must be aligned with the
breaker bar
.
43