Table of Contents
Advertisement
Cylinder pin
bolts (4)
84
P
R
ACKER
EMOVAL
To remove the packer:
1.
Start the engine and hydraulic system. Bring the packer to
the rear end of the body (full eject) to easily access the
pins..
2.
Stop the engine and turn off the hydraulic pump.
3.
Enter the hopper and remove the grease fitting hoses (on
each cylinder).
Grease fitting
hoses
4.
Remove the packer end cylinder pin bolts (4 on each pin).
5.
Secure both cylinders to keep them from falling on the
body floor.
6.
Get out of the hopper and close the side access door.
7.
Start the engine and turn on the hydraulic pump.
8.
Retract packer cylinders.
9.
Perform the lockout tagout procedure.
10.
Using an appropriate and safe lifting device, pull the
packer out of the body.
M
AKE SURE THAT THE PACKER IS SECURED BEFORE PULLING IT OUT
. F
OF THE BODY
AILURE TO DO SO MAY RESULT IN DAMAGE
INJURY OR EVEN DEATH
P
ROCEDURE
DANGER
.
,
SEVERE
Part #: 90309
Hide quick links:
Advertisement
Table of Contents
