Outer grease
fitting
Part #: 90309
2.
Remove the both outer grease fittings located on each
side of the arm pivot tube. That way, you won't damage
the grease fittings or the lifting straps.
3.
Securely attach the slings to the lift beam, which was
previoulsy installed on the overhead crane.
4.
Wrap a lift sling around each end of the arm pivot tube.
5.
Unlatch the body latches (one on each side).
M
AKE SURE THAT THERE IS ENOUGH CLEARANCE BEFORE LIFTING
Lift sling
THE BODY
6.
Raise the front body. Do not raise the front body more
than 28 inches high.
7.
Install proper safety props before performing maintenance
under a lifted body.
A
LWAYS USE PROPER LIFTING DEVICES AND SAFETY PROPS BEFORE
PERFORMING ANY MAINTENANCE TASK UNDER A LIFTED BODY
F
AILURE TO DO SO MAY RESULT IN SEVERE INJURY OR EVEN DEATH
CAUTION
.
DANGER
.
.
3