Prior To Hydraulic System Maintenance - Wittke StarLight Maintenance Manual

6
P H
RIOR TO YDRAULIC
M
AINTENANCE
As with all hydraulic systems, it may be necessary to
periodically check and adjust the pressure relief settings. It may
be that a major hydraulic component has been changed, the
unit is not performing in terms of payload, or the unit has
recently been put into service and the system requires
adjustment following a run-in period.
F
OLLOW A PROPER LOCKOUT
SERVICING THE HYDRAULICS
. R
RESULT EFER TO
INFORMATION ON SAFETY AND LOCKOUT
Caution:
• The mechanic must have previous hydraulic knowledge as
serious injury or death can result from following improper
procedures.
• Human skin can be easily penetrated by high pressure oil
(2000 psi and above). Failure to take appropriate safety
precautions may result in serious injury or death.
• Also, there are extreme overhead dangers if equipment is
not properly supported when servicing areas on the
hydraulic system.
S
YSTEM
CAUTION
/
TAGOUT PROCEDURE PRIOR TO
. D
EATH OR SERIOUS INJURY CAN
O M
THE PERATOR ANUAL
/
TAGOUT PROCEDURE
FOR MORE
.
Part #: 90309