How To Use The Lockout Device - Conair GasTrac User Manual

CAUTION:
or repairs on this product, you should disconnect
and lock out electrical power sources to prevent
injury from unexpected energization or start-up. A
lockable device has been provided to isolate this
product from potentially hazardous electricity.
Lockout is the preferred method of isolating machines or
equipment from energy sources. Your Conair product is
equipped with the lockout device pictured below. To use the
lockout device:
1
Stop or turn off the equipment.
2
Isolate the equipment from
electrical power.
Turn the rotary disconnect
switch to Off, or O position.
3
Secure the device with an
assigned lock or tag.
4
The equipment is now locked out.
WARNING:
!
devices and returning switches to the ON position,
make sure that all personnel are clear of the
machine, tools have been removed and all safety
guards reinstalled.
UGD014/0497
Before performing maintenance
O
Before removing lockout
GasTrac Process Air Heater
H
THE
D
I
U
OW TO SE
L
OCKOUT
EVICE
I
NTRODUCTION
1-5