To Stop Drying - Conair GasTrac User Manual

IMPORTANT: Do not shut down the host dryer before
stopping the GasTrac.
After stopping the GasTrac, allow the host dryer's
process blower to continue running for a minimum of 2
minutes. This prevents excessive heat from building up
in the GasTrac.
2216
235.0
OP1
OP2
2
250.0
SP2
REM
RUN
MAN HOLD
1
Press the red
STOP
The green indicator light turns off.
The gas inlet valves should close.
The combustion blower should stop.
2
Press the
ON/OFF
The burner control turns off.
The temperature controller turns off.
3
Turn the main power disconnect off.
The variable speed control display remains
lit for a brief period. Then it becomes blank.
CAUTION: Voltage present
Some voltage will be present in the vari-
able speed drive for a brief period after
power has been turned off. When the volt-
age is gone, the variable speed control
display will become blank.
4
Turn the host dryer off after at least 2 minutes.
UGD014/0497
1
button.
switch to
OFF.
GasTrac Process Air Heater
T
O
D
RYING
O
O
S
TOP
4-5
PERATION