Attention: Read This So No One Gets Hurt - Conair GasTrac User Manual

We design equipment with the user's safety in mind. You can
avoid the potential hazards identified on this machine by fol-
lowing the procedures outlined below and elsewhere in the
User Guide and related instructional materials.
! WARNING: Follow instructions carefully.
Incorrect installation, operation or maintenance of
this product can result in a fire, explosion or
other hazards causing property damage, severe
personal injury or loss of life.
Only licensed electrical/mechanical contractors, or
individuals experienced with the installation of nat-
ural gas piping, process air ducting, thermal insula-
tion, exhaust ducting and regional codes for indus-
trial gas appliances, should install the GasTrac.
The GasTrac should be maintained and repaired
by qualified technicians who are equipped with the
correct tools and are experienced in the mainte-
nance and repair of industrial gas appliances.
Inspection and testing of gas supply piping,
exhaust ducting and the GasTrac gas controls and
safety features should be performed periodically to
ensure safe operation.
WARNING: If gas odor is detected...
!
Open doors and/or windows to vent the gas.
Do not touch electrical switches.
Extinguish all open flames.
Immediately have qualified personnel determine
the source of the gas leak and repair it.
WARNING: Do not store or place
!
aerosol, compressed gas or flammable
materials on or near this equipment.
The hot temperatures associated
with the drying process may
cause aerosols or other
flammable materials placed or
stored near the GasTrac to
explode.
UGD014/0497 GasTrac Process Air Heater
ATTENTION:
!
R
EAD THIS SO NO
ONE GETS HURT
1-3
I
NTRODUCTION