Table of Contents
Advertisement
2-2. Setup Menu
AUX Video Select Display
* AUX *
AUX
MATRIX ACTIVE
>AUX1 D-RET1 Active NO
AUX2 D-RET2
AUX3 A-RET1
AUX4 A-RET2
Item
Setup
AUX MATRIX ACTIVE/
INACTIVE
AUX1
D-RET1/2/3/4
AUX2
AUX
AUX3
A-RET1/2/3/4
AUX4
PROMPTER
CAM
n
When the dual mode is selected and set (in primary and secondary), the AUX Video line setup becomes
invalid and the setup is fixed to the SERIAL AUX INPUT.
2-4 (E)
Function
Sets the AUX video line.
ACTIVE :
Controls by CCU.
INACTIVE : Controls by MSU.
When INACTIVE is set, follows the RET MATRIX setup
of the MSU setup menu.
Selects the signal to be assigned to each of AUX1/2/3/4
when any of them is selected by the CA-950/950P.
The following signals can be selected for the
AUX1/2/3/4
. D-RET (SERIAL RET INPUT) 1/2/3/4
. AUX (SERIAL AUX INPUT)
. A-RET (RET INPUT) 1/2/3/4
. PROMPTER (PROMPTER INPUT)
. CAM (CAMERA picture)
ACTIVE display
Indicates the line selected at the CA-950/950P side.
When any of AUX1/2/3/4 is not selected by the
CA-950/950P, the SERIAL AUX IN signal to the
CCU-900/900P is selected as the signal of the AUX line.
IN/NO display
IN : When there are input signals
NO : When there are no signals
Factory setting
ACTIVE
AUX1 = A-RET1
AUX2 = A-RET2
AUX3 = D-RET1
AUX4 = D-RET2
CCU-900/900P IMM
Advertisement
Table of Contents
