Sony CCU-900 Installation And Maintenance Manual page 27

c
. Mount the unit with more than two persons.
A one-man job may cause injury.
. If you forget to fasten the screws of the rack angle, the
unit may slip and fall, causing injury.
After rack mounting, be sure to fasten the screws.
. Install in a posture of stability.
Injury could occur by drop of the unit in unbalance
condition of installation or removal. Install in a posture
of stability and carefully.
. Be careful not to catch your finger or hand in rack mount rail.
5. While pressing the stoppers of the inner rails, slide the
inner rails fully into the outer rails, and push the unit
into the rack slowly.
Rack
Stopper
Outer rail
Inner rail
6. After confirming that the unit can be moved smoothly,
tighten the screws (B5 x 8) secured temporarily in the
step 4.
n
When securing the front brackets to the rack by screws,
pull the unit out of the rack about 20 cm (8 inches), and
fasten the screws of the front brackets to the rack.
7. After installing the unit in the rack, fix the unit to the
rack using the four screws (RK5 x 14) and four
ornamental washers.
Ornamental washer
RK5 x 14
CCU-900/900P IMM
Rack
Ornamental
washer
RK5 x 14
1-7. Installing in 19-inch Rack
1-19 (E)