Usb Connector 2/3 (Usb2/3); Usb Connector 4/5 (Usb4/5) - Kontron KTQM67/Flex User Manual

KTD-N0819-E

5.3.2 USB Connector 2/3 (USB2/3)

USB Ports 2 and 3 are mounted together with DP1 port.
Note
1
1
Note 1: In order to meet the requirements of USB standard, the 5V input supply must be at least 5.00V.
Signal Description
USB2+ USB2-
Differential pair works as Data/Address/Command Bus.
USB3+ USB3-
5V supply for external devices. SB5V is supplied during powerdown to allow
5V/SB5V wakeup on USB device activity. Protected by resettable 1A fuse covering both USB
ports.

5.3.3 USB Connector 4/5 (USB4/5)

USB Ports 4 and 5 are mounted together with ETH1 port.
Note
1
1
Note 1: In order to meet the requirements of USB standard, the 5V input supply must be at least 5.00V.
Signal Description
USB4+ USB4-
Differential pair works as Data/Address/Command Bus.
USB5+ USB5-
5V supply for external devices. SB5V is supplied during powerdown to allow wakeup
5V/SB5V
on USB device activity. Protected by resettable 1A fuse covering both USB ports.
Page 39
Type Signal PIN
PWR 5V/SB5V 1 2
IO USB3-
PWR 5V/SB5V 1 2
IO USB2-
Type Signal PIN
PWR 5V/SB5V 1 2
IO USB5-
PWR 5V/SB5V 1 2
IO USB4-
IO-Area Connectors
Signal Type Note
3 4 GND PWR
USB3+ IO
3 4 GND PWR
USB2+ IO
Signal Type Note
3 4 GND PWR
USB5+ IO
3 4 GND PWR
USB4+ IO
KTQM67 Users Guide