Table of Contents
Advertisement
KTD-N0819-E
•
Hardware
Smart Fan control system, support Thermal® and Speed® cruise for three on-
Monitor
board Fan control connectors: FAN_CPU, FAN_SYS and FEATURE (AUXFAN in
Subsystem
BIOS)
•
Three thermal inputs: CPU die temperature, System temperature and External
temperature input routed to FEATURE connector. (Precision +/- 3ºC)
•
Voltage monitoring
•
Intrusion (Case Open) detect input, (via Feature connector)
•
Sleep S5# Indication, (via Feature connector)
•
System Powergood Signal, (via Feature connector)
Power
ATX/BTX (w. ATX+12V) PSU for full PCI/PCIe load.
Supply Unit
Alternatively (mITX version only): +12V single supply via ATX+12V (4-pole) connector,
but with limitation to power load (especially +5V for USB).
Battery
Exchangeable 3.0V Lithium battery for on-board Real Time Clock and CMOS RAM.
Manufacturer Panasonic / Part-number CR-2032L/BN, CR2032N/BN or CR-2032L/BE.
Approximate 6.2 years retention.
Current draw is 4.1µA when PSU is disconnected and 0 µA in S0 – S5.
CAUTION: Danger of explosion if the battery is incorrectly replaced. Replace
only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's instructions.
•
BIOS
Kontron Technology / AMI BIOS (EFI core version)
•
Support for ACPI 3.0 ( Advanced Configuration and Power Interface), Plug & Play
o
o
o
•
"Always On" BIOS power setting
•
RAID Support (RAID modes 0,1, 5 and 10)
•
Operating
WinXP
•
Systems
Windows 7
•
Support
Linux
•
VxWorks
Page 12
Suspend (S1 mode)
Suspend To Ram (S3 mode)
Suspend To Disk (S4 mode)
System Specification
KTQM67 Users Guide
Advertisement
Table of Contents
