DSC Maxsys PC4020 Installation Manual page 40

V3.3 security system

Hide thumbs Also See for Maxsys PC4020:

Table of Contents

Kissoff Pulse (00)

Any output programmed for 'Kissoff' can be active from

000 to 255 seconds. The default setting is 003 seconds.

Ground Start (01)

Any output programmed for 'Ground Start' can be active

from 000 to 255 seconds. The default setting is 000 seconds.

NOTE: The panel will wait until the end of the Ground

Start before dialing. This feature must not be used on

UL listed systems.

Chime Pulse (02)

Any output programmed for 'Chime Pulse' can be active

from 000 to 255 seconds. The default setting is 002 seconds.

Duress Pulse (03)

Any output programmed for 'Duress Pulse' can be active

from 000 to 255 seconds. The default value is 005 seconds.

Card Used (04)

Any output programmed for 'Card Used' can be active

from 000 to 254 seconds. The default value is 005 seconds.

A pulse time of 000 will cause the output to toggle every

time a card is presented.

NOTE: This output will not activate when used with the

'Wait for Privileged Card' feature.

Table of Contents

Show Quick Links

Table of Contents