Mounting The Ff520; Installation; Connections - Standard Horizon FF520 Installation And Operation Manual

2. MOUNTING THE FF520

The FF520 must be properly installed according the following instructions to get the best
possible performance.
TRANSDUCER: refer to Chapter 3 and to the Installation Manual supplied with the Transducer.
2.0

INSTALLATION

The FF520 is designed to be mounted horizontally or vertically to enable it to be installed
in the most convenient position. Although the unit is water resistant, care must be taken to
select a location where it will not be subjected to spray or rain. After the cables have been
run, and connected as per Par. 2.1, mount the FF520 in the desired location using the
supplied hardware.
2.1

CONNECTIONS

Tee Cable
to
GPS Chart Plotter
Temp2 Input
NMEA / Alarm Output
Transducer /
Triducer
( Depth / Speed / Temp1)
FF520
NOTE
Figure 2.0 - The FF520 Installing
Status LED
Power Cable
Figure 2.1 - The FF520
Page 9